Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 55)

Post-Installation Tasks Chapter 4
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 55
To verify that the Historian server is updating data for default
tags:
1. On the computer with the Historian server installed, go to
Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Management Tools. The System
Management Tools dialog box appears.
2. Under Collectives and Servers, select the Historian server
whose data you want to view.
3. Under System Management Tools, select Data > Archive
Editor.
4. In the (Tag Not Specified) tab, click . The Tag Search
dialog box appears.
5. In the Tag Mask text box, type cdt158, and click Search.
The cdt158 tag appears in the search results list.
6. Click OK.
The list of events of the selected tag is displayed in the tab in
the right pane of the System Management Tools dialog box.
NOTE
For more information on the Archive Editor, click .
You can choose to manually install or upgrade the AF SQL database
(PIFD) by selecting either of the installation modes during the
installation or the upgrade of the AF server:
• AF Application Service and AF SQL Database with
unprocessed database scripts.
• AF SQL Database with unprocessed database scripts.
Verify that the Historian
Server is Updating Data for
Default Tags
Manually Create or Upgrade
the AF SQL Database