Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 21)

Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 21
Chapter 3
Installing FactoryTalk Historian
In this chapter you will find instructions on how to install the
following:
• Core components of the product (page 21).
• FactoryTalk Historian suites (page 28).
• Advanced Server components (page 44).
NOTE
Before you install any components of FactoryTalk Historian SE,
refer to the Release Notes for the up-to-date information on the
installation procedures.
In this section you will find instructions on how to install the
following core components of FactoryTalk Historian SE:
• Microsoft SQL Server (page 21)
• FactoryTalk Services Platform (page 23)
• FactoryTalk Activation Manager (page 25)
• RSLinx Enterprise (Data Server) (page 26)
Microsoft SQL Server 2008 is a requirement for running
FactoryTalk Historian Asset Framework.
FactoryTalk Historian SE 4.0 supports SQL Server Express and
Standard Editions. Rockwell Automation recommends using the
SQL Server Express Edition, which is available on the FactoryTalk
Historian SE installation DVD. If you choose to use the SQL
Standard Edition (for example, from the FactoryTalk VantagePoint
installation DVD), please acquire appropriate Client Access
Licenses (CAL) and/or processor licenses from Microsoft. For more
Installing Core Components
Install Microsoft SQL Server