Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 92)

Chapter 5 Configuring FactoryTalk Historian
92 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
3. In the Limit column, type the maximum number of licenses
for points that the server will use to collect data from the
selected interface type. The number must be a multiple of 50.
If you type incorrect information in the Interface Type
Allocation or Limit columns, a relevant message will appear.
Read the message to learn about the error, for example:
NOTE
For PINotifications, you allocate the maximum number of
licenses for individual notifications instead of points. The licenses
are taken from the Rockwell pool.
4. Click Apply. The license limit of the FTLD interface type is
updated accordingly: