Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 44)

Chapter 3 Installing FactoryTalk Historian
44 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
16. Restart the computer.
The data from multiple FactoryTalk Historian SE servers and
FactoryTalk Historian ME servers can be brought together into a
single information management and decision support system using
FactoryTalk VantagePoint.
For detailed instructions on installing FactoryTalk VantagePoint
and its components, refer to the FactoryTalk VantagePoint
documentation.
The FactoryTalk Historian SE DVD contains several optional
Historian components used for data management, such as
FactoryTalk Historian DataLink or PerfMon Health Monitor.
These components are located in the Redist folder on the
installation DVD.
If you choose to install these components, be sure to install them
after you install FactoryTalk Historian SE. For further information
regarding these components, refer to the FactoryTalk Historian SE
documentation, available in the Redist\Docs folder on the
FactoryTalk Historian SE installation DVD.
Advanced Server is a collection of add-on components to
FactoryTalk Historian SE Server. The Advanced Server includes:
• ACE Advanced Computation Engine for Visual Basic
calculations on Historian data
• Data Access
• JDBC Data Provider
• ODBC
• OLE DB Enterprise
Install FactoryTalk
VantagePoint (Optional)
Install Additional Historian
Components
Installing Advanced Server
Components (Optional)