Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 82)

Chapter 5 Configuring FactoryTalk Historian
82 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
Type of license
activation
Point sources Description
FHSE.OPC not applicable Activates the following Advanced Server
components for the standard FactoryTalk
Historian SE server:
• OPC DA Server
• OPC HDA Server
• OPC HDA DA Server
FTBAInt.XXX FTBOINT
PIFTBOINT FactoryTalk Batch Interface. The license sets the
number of points from the FTBOINT and
PIFTBOINT interfaces to unlimited.
FHSE3ADD.XXX Third-party and
Rockwell point
sources.
See "How Licenses Are Distributed Between
License Pools (page 83)" for details.
The names of the license activations have the following structure:
<Type>.<Quantity>, and contain the following information:
• <Type>
The type of the license activation.
• <Quantity>
The maximum number of individual licenses that can be
allocated to an interface type (or point source). Each license
corresponds to a single point with which the server can collect
data from the interface.
For example, for the
FTHSE license activation, the quantity
ranges from 250 to 100K points.
• For some types of license activations, instead of the
<Quantity> part there is a combination of digits and/or
characters that further describe the activation, e.g.
FTHSE.H2H, FTBAInt.1.
Each license activation contains a number of individual licenses. The
system distributes the licenses between the Rockwell and General
license pools, depending on the type of license activations you have.