Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 85)

Configuring FactoryTalk Historian Chapter 5
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 85
TIP
The symbols used in the formulas presented below, mean the following:
∑ "the sum of"
Min "the lower value of the two in the brackets"
Max "the greater value of the two in the brackets"
In the following example we will calculate how licenses will be
distributed between the General and Rockwell license pools with
FHSE3ADD license activations.
We will use the following values:
Activation Value ∑ (sum)
FHSE.2K 2000 12000
FHSE.10K 10000
FHSE3ADD.2K 1 2000
FHLD.5K 5000 5000
PTY3.500 500 500
Total 19500
To distribute licenses between the license pools:
1. Calculate the <BaseLicenseCount> value.
<BaseLicenseCount> = 20% * ∑ <FHSE licenses>
<BaseLicenseCount> = 20% * 12000
<BaseLicenseCount> = 2400
2. Calculate the number of licenses for the Rockwell license pool.
<RockwellLicensePool> = ∑ <FHLD licenses> + ∑ <FHSE
licenses> - <BaseLicenseCount>
<RockwellLicensePool> = 5000 + 12000 - 2400
<RockwellLicensePool> = 14600
3. Calculate the number of licenses for the General license pool.
Distributing Licenses with
FHSE3ADD Activation