Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 93)

Configuring FactoryTalk Historian Chapter 5
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 93
5. Repeat the steps for other interface types that you want to add.
6. Click OK.
7. Restart the FactoryTalk Historian SE server (page 102) for the
changes to take effect.
You can view the information on the allocated licenses in System
Management Tools (page 93).
To view the information on the allocated licenses in the
FactoryTalk Administration Console:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Administration Console. The FactoryTalk Administration
Console dialog box appears.
2. Log on to the FactoryTalk Directory.
3. In the Explorer tree of the FactoryTalk Administration
Console dialog box, go to System > Connections >
Historical Data.
4. Right-click Production Historian, and select Properties. The
Historian Server Connection Properties dialog box appears.
5. Click the Point Sources tag.
Under Points in Use, the number of currently used licenses is
displayed.
Viewing Allocated Licenses