Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 177)

Removing FactoryTalk Historian SE Appendix F
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 177
NOTE
Stop the Batch interface before you start the removal process.
To remove the suite using the Start menu:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE.
2. Click the Uninstall link of the FactoryTalk Historian suite
you want to remove from the computer.
The removal wizard appears.
3. On the wizard pages, click Next and then Uninstall to start
the removal process.
4. Follow the on-screen instructions to complete the process.
NOTE
Stop the Batch interface before you start the removal process.
To remove the suite using Control Panel:
1. Go to Start > Control Panel > Programs > Programs and
Features.
2. Under Uninstall or change a program, select the name of the
FactoryTalk Historian suite you want to remove from the
computer, and click Uninstall/Change.
The removal wizard appears.
3. On the wizard pages, click Next and then Uninstall to start
the removal process.
4. Follow the on-screen instructions to complete the process.
Removing the Suite Using
the Start Menu
Removing the Suite Using
Control Panel