Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 67)

Configuring FactoryTalk Historian Chapter 5
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 67
Users
Users Description and privileges
FTHEngineer A preconfigured user, member of the FTHEngineers and
FTHSupervisors groups.
FTHOperator A preconfigured user, member of the FTHOperators group.
FTHSupervisor A preconfigured user, member of the FTHSupervisors group.
piadmin A preconfigured administrative PI User with unrestricted access to
Historian server resources.
You can or cannot do the following with the piadmin user:
• You can disable its properties:
• To be used in a mapping.
• To be used in a trust.
• To be used for an explicit logon.
• You cannot:
• Delete it.
• Fully disable it.
You should:
• Map it only to a limited group of administrators.
Piadmin is a member of the FTHEngineers, FTHSupervisors, and
FTHAdministrators groups.
pidemo A generic PI User, member of the piusers group.
Groups
Groups Description and privileges
FTHAdministrators It represents Historian server administrators and has
read-and-write access to all Historian server resources and default
points, except the following database tables:
• PIDS
• PIHeadingSets
• PIPOINT
You can or cannot do the following with the FTHAdministrators
group:
• You can:
• Map it to the AD group that represents your Historian server
system administrators.
• Adjust its access permissions to meet your needs.