Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 94)

Chapter 5 Configuring FactoryTalk Historian
94 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
NOTE
For PINotifications, each notification consumes 1 point in the
FactoryTalk Administration Console.
To view the information on the allocated licenses in the System
Management Tools:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Management Tools.
2. Under Collectives and Servers, select the server for which you
want to view the license information.
3. Under System Management Tools, select Operation >
Licensing.
4. Click Resources >
PointSourcesLimit.<InterfaceTypeName>.
NOTES
<InterfaceTypeName> is the abbreviated name of the interface
type you added to the Point Sources tab when allocating
points.