Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 123)

Configuration
8-3
Preface
The T6200 Unit Automation System is configured by selecting pre-programmed control
functions to satisfy the control requirements. There are more than 100 different control
functions that reside in the library of each controller. A function is a software routine that
performs a given control task. Most functions may be used more than once within a
configuration.
A good knowledge of the compressor/turbine and the process and a clear idea of what the
turbomachinery requirements are will be helpful in developing the controller configuration.