Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 133)

Configuration
8-13
Moving or copying FBD objects
Press this button or press ESCAPE before selecting objects.
The FBD editor fully supports drag and drop for moving or copying objects. To move objects,
select them and simply drag them to the desired position.
To copy objects, you may do the same, and just press the CONTROL key while dragging. It is
also possible to drag pieces of diagrams from a program to another if both are open and visible on
the screen.
At any moment while dragging objects you can press ESCAPE to cancel the operation.
Alternatively, you can use classical Copy / Cut / Paste commands from the Edit menu. When you
run the Paste command, the editors turns in “Paste” mode, with a special mouse cursor. Click in
the diagram and move the mouse cursor to the desired position for inserting pasted objects.
Inserting FBD objects on a line
The FBD editor enables you to insert an object on an existing line and automatically
connect it to the line. This feature is available for all objects having one input pin and one
output pin, such as variable boxes.