Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 163)

Configuration
8-43
Settings:
Lock Device List
To prevent MOPS from adding controllers automatically to the device list, check this box. As
described above, if this box is not checked, then MOPS will automatically add to the device list
file any controllers which do not already exist in its database and which are found on the network.
Status message window and Clear Status button
The window with the vertical scroll bars will display all status messages received from all ICS
TRIPLEX controllers on the network. This window can be cleared by simply clicking on the
“Clear Status” button.
Add
Controller
This button allows a user to add a controller to the MOPS device database file (devlist.txt). As
described above, the user can create the devlist.txt file using a text editor. MOPS also provides an
automatic method for creating this file and adding controllers to the file. Simply click on the “Add
Controller” button, then press the button on the controller which makes it send its identification
information on the Ethernet, then enter the name to be used for that controller and click on OK.
The controller will be added to the MOPS device database, and its tags will be requested and
added to the MOPS tag database.
Broadcast Time
This button on the main screen allows a user to force the MOPS to send out a time message to all
controllers on the network. Controllers utilize the time when reporting status messages and alarms
to the host.
Reset Password
Some of the functionality of MOPS is protected with a password. If the user forgets this password,
then it will be necessary to reset the password to the factory default value. To reset the password,
enter the “reset code” in the corresponding text box and click on the “Reset password” button. If
the “reset code” entered is valid, the password will be reset to the factory default value. To obtain
the “reset code”, call ICS TRIPLEX at (713) 353-2400.