Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 48)

Hardware Installation/Maintenance
3-26
Standalone T6200 Controller Operator Interface Ethernet
External Cable Connection
For Standalone T6200 Controller applications where no communications to other controllers or
workstations are required, the T6200 Controller ENET1 connector may be connected directly to the
OI (Operator Interface) connector with a short Ethernet crossover cable (ICS Triplex p/n 6009-0030)
eliminating the necessity of an Ethernet hub. Refer to Figure 3-24.
FIGURE 3-24
Standalone
T6200 Controller
Operator Interface
Ethernet Crossover
External Cable
Connection