System requirements, Installing web studio, Screen editing and configuration – Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller User Manual

Page 88: Tag database

Advertising
background image

HMI-6200 Operator Interface

6-22

interface that allows for easy customization and adaptation to the specific process/plant configuration.
Besides adaptation at the time of system set-up, some display configuration is usually done later on.

System Requirements


The HMI-6200 operator interface is based on Web Studio. To develop/adapt an application with Web
Studio software, the following hardware and software is recommended for the Host computer...

- IBM-compatible computer with an Intel compatible processor
- Windows NT/XP/2000 operating system
- 128 MB of RAM
- 200 MB of free hard disk space
- MS Internet Explorer 4.0 or higher
- CD-ROM drive (only for initial setup)
- Ethernet connection for downloading applications

Installing Web Studio

The installation CD is used to install InduSoft Web Studio. The development environment runs on
Microsoft Windows NT/XP/2000; the CEView runtime environment, which is downloaded to the HMI-
6200 operator interface, comes pre-installed on the runtime workstation.

The Web Studio provides the tools needed to adapt the pre-formatted HMI-6200 operator interface to
the customer’s specific application. Refer to InduSoft Web Studio installation instructions.

Screen Editing and Configuration

The screen editor permits to change the pre-defined ICS TRIPLEX screens and create new screens and
dialogs. The configuration task allows for changing any element in the configuration, including the
database. An emulation of the revised/extended application can be run and tested on the development
computer before downloading it to the HMI-6200 operator interface.

Refer to the on-line Technical Reference and User Manual under the Help tab for detailed instructions.

Tag Database


The T6200 is delivered with a pre-configured Application Tag database. These tags are shown/declared
under the Tag List and Datasheet View of the Database tab.

The pre-configured Application Tag database consists of generic tags. It is recommended that this
generic tag structure be retained and that custom tag requirements be accommodated by simple labels
on faceplates, etc. (not database tag changes).

Advertising