Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 97)

HMI-6200 Operator Interface
6-31
Verify that all dynamic tags required by the HMI-6200 Operator Interface are listed under Tag
Name and are associated with the correct OPC Server item. Also, make sure that tags are not
selected as Scan Always unless the specific tags require continuous scanning, such as Alarm/Alert
related tags.
Tag Names are obtained from the Database (double-click on Tag Name column). To associate the Tag
Name to the OPC Server item, right click on the item column and hit OPC Browser. This enables you
to browse all the OPC Server configured items. If the T6200 connection is not already established it
will open the OPC Server link.
FIGURE 6-30
OPC Worksheets:
Stage#1 Parameters