Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 55)

Software Installation
4-5
Windows will select “OEMSETUP.INF” in the “File name:” field as shown in Figure 4-7. Select
“Open” to install the NDIS3P2K.INF driver.
The “Virtual Packet Driver” will be highlighted as shown in Figure 4-8. Select “OK” to complete
the driver installation.
Install the MICON OPC Server and Related Components
Install the MICON OPC Server and related components. Execute the file "\MICON\Setup.exe” on
the CD:
ƒ Double click “MICON” folder located in the root directory of the CDROM drive
ƒ Double click “Setup.exe”. The setup program will copy various files to your hard disk drive
and copy the OPC Server and related files to a directory of your choice. Then the setup
program will proceed to install the OPC Data Access components. This will open the
“InstallShield Self-extracting EXE” window (Figure 4-9).
Figure 4-5
Figure 4-6
Select Network
Protocol Window
Install From Disk
Window