Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 171)

Specifications
9-3
GENERAL T6200
HARDWARE CONTROLLER
SPECIFICATIONS
The following electrical characteristics (Table 9-1) are valid at 25 o C after a warm-up period of at
least 20 minutes (unless otherwise stated).
Important Note: The termination panel of the T6200 accommodates 32 I/O points. The 32 I/O
points in the T6200 Controller are jumper selectable on a point per point bases as follows:
T6200C
8 are Analog Input Only
4 are Analog Output Only
8 are Analog Input or Discrete Input
5 are Discrete Input or Discrete Output
3 are Discrete Input, Frequency Input or Discrete Output
4 are Analog Input or Analog Output
T6200D
25 are Discrete Input or Discrete Output
4 are Discrete Input Only
3 are Discrete Input, Frequency Input or Discrete Output
Refer to Table 1-1 in Section 1 for I/O channel assignment information.