Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 93)

HMI-6200 Operator Interface
6-27
Configuring the Security System
The Security folder allows you to define Groups and Users as well as their access privileges to Web
Studio tools and to the application. Through the Database tab, you can tailor Groups and Users to your
security needs.
- Password: __________ is pre-defined as the Main Password. You will need to enter the password
each time you access the Security System (so it is mandatory that your remember it). To change the
Main Password contact the factory.
- Development Group: Double-click Development, enter the Password, and the Group Account
window will open.
In this window, you enable/disable the Development Group operations and you set the range levels.
Verify that the Security Levels and Access are defined in accordance with your application
requirements.
FIGURE 6-22
Workspace Window
Task Tab
Selection of
Security
FIGURE 6-23
Security
Group Account
Window
Development Group