Rockwell Automation T6200 Compressor Anti-Surge and Capacity Controller - Manual (Page 142)

Configuration
8-22
Adaptation of Pre-Defined Configuration
The T6200”C” or T6200”D” controller is delivered as a pre-configured package in Function Block
Diagram format.
System Requirements
The T6200 configuration file utilizes the MICON OPC Configuration Studio interface as the
configuration upload and download utility and the Straton for MICON FBD programming tool.
To develop/adapt an application with the Configuration Studio software, the following hardware
and software is recommended as a minimum for the Host computer...
- IBM-compatible computer with an Intel compatible processor
- Windows NT/XP/2000 operating system
- 128 MB of RAM
- 200 MB of free hard disk space
- CD-ROM drive (only for initial setup)
- Ethernet connection for downloading applications
Installing the OPC Server
The installation CD is used to install the MICON OPC Server. The OPC Server runs on
Microsoft Windows NT/XP/2000. Refer to Software Installation, Section Four of this
manual, for installation instructions.
Installing the Straton for MICON Configurator Workbench
The installation CD is used to install the STRATON configuration tool. The development
environment runs on Microsoft Windows NT/XP/2000. Refer to Software Installation,
Section Four of this manual, for installation instructions.
Installing the Straton for MICON configurator includes the following three steps:
a) Install the WIBU software by running the program “\WIBU\WkRt-Int.exe” on the installation
CD. On most screens, use the default options.
b) Then run the program “\Straton\Setup.exe” on the Installation CD and follow the prompts. By
default, the program will install in the folder “C:\Program Files\Straton for MICON”. A group
titled “Straton for MICON” will be created in the “Start Menu->Programs” menu. Before
running the program, is necessary to enter the license code. The license code is available on the
installation CD in a file called “license.txt”.
c) To enter the license code, run the “License” program from the “Start Menu->Programs-
>Straton for MICON” program group. Enter the license code provided in the license.txt file.
Finally, to run the Configurator, select the “Straton for MICON” option from the same
location.
Configuration File Interface
The Configuration File Interface of the OPC Server permits to interact with the pre-defined
configuration file. The Configuration File Interface task allows for uploading, downloading,
compiling, executing, preserving, halting and deleting of the T6200 controller configuration file.
Controller T6200 Tag Database
The T6200 is delivered with a pre-configured Application Tag database. The pre-configured
Application Tag database consists of generic tags (Ps, Pd, AS_PID, Cap_PID, AO_01, etc.). It is
recommended that this generic tag structure be retained and that custom tag requirements be
accommodated by simple graphic labels on faceplates, etc. (not database tag changes) at the
Operator Interface level (refer to Section Six of this manual).