Metrohm tiamo 2.1 Manual - Manual (Page 1007)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 993
The calibration can be carried out with both manual and automatic solution
changes with the aid of a Sample Processor.
Commands
The following commands can be selected for calibration:
￭ CALL LOOP pH
Calibration loop for the calibration of pH electrodes.
￭ 5.6.5.5CAL MEAS pH
Measurement of buffers for the calibration of pH electrodes.
￭ CAL LOOP Conc
Calibration loop for the calibration of ion-selective electrodes (ISE elec-
trodes).