Metrohm tiamo 2.1 Manual - Manual (Page 270)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
256 ￭￭￭￭￭￭￭￭ tiamo 2.1
<vs val=""/> Variable status:
OK = The value is ok and has not been monitored.
OKL = The value is ok and has been monitored.
LE = The value exceeded the limit and has not been moni-
tored.
LEL = The value exceeded the limit and has been moni-
tored..
NV = The value is invalid and has not been monitored.
NVL = The value is invalid and has been monitored.
<vt val=""/> Variable type:
TX = Text
NR = Number
DT = Date/Time
NA = Unknown
<vn val=""/> Variable name
</data>
</SmplPos>
– <SmplSize> Sample size.
– <data>...</data> see above
</SmplSize>
– <SmplUnit> Sample size unit.
– <data>...</data> see above
</SmplUnit>
<InputTime val=""/> Date and time at which the sample size was entered.
<InputSource val=""/> Data source for the sample size:
manual = manual data input.
'Device name' = Data input from balance or barcode
reader (with Sartorius balances with their own data mem-
ory the memory number in parentheses is displayed addi-
tionally to the balance name).
'File name' = Data import from a file.
<SmplModReason val=""/> Reason for the sample data modification.
<SmplModComment val=""/> Comment on sample data modification.