Metrohm tiamo 2.1 Manual - Manual (Page 948)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
934 ￭￭￭￭￭￭￭￭ tiamo 2.1
Range 0 ... 999999 s
Default value 52 s
Measuring interval
Time interval for entering a measuring point in the measuring point list.
Range 0.1 ... 999999.0 s
Default value 2.0 s
Stop measured value
Stops when the preset measured value has been reached since the start of
the measurement.
Range 0 ... 1E+99
Selection off
Default value off
off
No stop.
Measurement without drift control
If the option Measurement without drift control has been selected, then
the following parameters will be displayed:
Measuring time
Maximum period of time for measurement.
Range 0 ... 999999 s
Default value 120 s
Measuring interval
Time interval for entering a measuring point in the measuring point list. Max.
number of entries?
Range 0.1 ... 999999.0 s
Default value 2.0 s
Stop measured value
Stops when the preset measured value has been reached since the start of
the measurement.
Range 0 ... 1E+99
Selection off
Default value off
off
No stop.