Metrohm tiamo 2.1 Manual - Manual (Page 185)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 ￭￭￭￭￭￭￭￭ 171
KFC / BRC
Selection
time | Measured value | amount | drift | Charge
| dV/dt | Ugen | Igen | Calculated 1…3 | External
1…3
Default value time
STAT
Selection
time | Measured value | Temperature | Volume
| dV/dt | Calculated 1…3 | External 1…3
Default value time
MEAS
Selection
time | Measured value | Temperature | dMW/
dt | Calculated 1…3 | External 1…3
Default value time
MEAS T/Flow
Selection
time | Measured value | Flow | Calculated 1…3
| External 1…3
Default value time
MEAS TC Cond
Selection
Temperature | Measured value | time | Calcula-
ted 1…3 | External 1…3
Default value Temperature
MEAS Opt
Selection
time | Measured value | Intensity | Transmis-
sion | Saturated pixels
Default value time
DOS
Selection
time | Measured value | Temperature | Volume
| dV/dt | Calculated 1…3 | External 1…3
Default value time
y1 axis
Selection of the quantity to be shown on the y1 axis (left y axis).
DET
Selection
Measured value | Volume | time | Temperature
| ERC | Calculated 1…3 | External 1…3
Default value Measured value