Metrohm tiamo 2.1 Manual - Manual (Page 1144)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1130 ￭￭￭￭￭￭￭￭ tiamo 2.1
Note
For Titrinos with 3 output lines: only the first 3 characters are used.
5.6.9.3 SCAN
5.6.9.3.1 SCAN - Overview
Dialog window: Method ▶ SCAN ▶ Properties... ▶ SCAN - 'Command name'
Command for scanning remote input lines.
Devices
This command can be executed only with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 888, 890, 901,
902, 904, 905, 906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 784, 785, 794, 795,
798, 799
Dosing Interface: 846
Coulometer: 756, 831
Conductometer: 856
pH/Ion - Meter: 867
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command SCAN are configured in the following
dialog window:
￭ SCAN - Properties
Command variables
The following command variables are generated in the method run by the
command SCAN and can be used in formulas under the designation 'Com-
mand name.Variable designation':