Metrohm tiamo 2.1 Manual - Manual (Page 1165)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1151
Note
Sample data can be loaded directly from a balance or a barcode
reader. The data import must be enabled for this purpose in the Run
window in which the determination is started (Single determination or
Determination series) and the corresponding devices must be defined.
The dialog window Sample data request will be closed automatically
after the data has been received from these devices.
Note
In the event the option Comments on modification of sample
data (live) is enabled in the Security settings, the dialog window
Modification comment sample data will be displayed after the sam-
ple data is entered, where a Comment and a Reason for the modifica-
tion must be entered.
5.6.10.3 CALL
5.6.10.3.1 CALL - Overview
Dialog window: Method ▶ CALL ▶ Properties.. ▶ CALL - 'Command name'
Command for calling tracks. Optionally a condition can be defined which
needs to be fulfilled in order to execute the CALL command.
Appearance
The command has the following appearance:
Each command can include to 10 call-ups.
Parameters
The parameters for the command CALL are configured in the following
dialog window:
￭ CALL