Metrohm tiamo 2.1 Manual - Manual (Page 176)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
162 ￭￭￭￭￭￭￭￭ tiamo 2.1
Accept data only for active window
If this option is selected, then the data sent from the barcode reader is
only imported into the open sample table if this is actively selected (i.e.
when the window has the focus).
Confirmation necessary to accept data during determination.
on | off (Default value: off)
If this option is switched on, then data will not be imported during a deter-
mination except when the Data input dialog of a REQUEST command is
open.
Import from file
on | off (Default value: off)
If this option is enabled, then external data from a file(e.g. via LIMS) will be
imported into a sample table. When this is the case, a check is made to
determine whether the specified import file is available when the sample
table is opened, when the sample table is loaded into the working sample
table and also periodically (every 10 s) when the sample table is open
(although not when the dialog window Edit line is open). If the import file
is available, then the data from this file is automatically inserted at the end
of the sample table. The import file is deleted after each import.
Note
No matter the number of data fields defined on the Display tab, the
import file must always contain for each line the entirety of the sample
data in the format Method name;Sample posi-
tion;ID1;ID2;ID3;ID4;ID5;ID6;ID7;ID8;ID9;ID10;ID11;ID12;ID13;I
D14;ID15;ID16;Sample size;Sample size unit
Import file
File that is to be imported. With the file can be selected in the dialog
window Select files for import.
Input File name
Import format
Selection of the import format for the import of data from a file.
Selection *.csv | *.csv (Unicode)
Default value *.csv
*.csv
Format for the import of CSV files with Western European ASCII character
sets.