Metrohm tiamo 2.1 Manual - Manual (Page 571)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 557
Window = Time
Range
0 ... 999999 s
Default value 0 s
Upper limit
Value for the upper limit of the window.
Window = Measured value pH
Range
-20.0 ... 20.0 pH
Default value 20.0 pH
Window = Volume
Range
0.00000 ... 9999.99 mL
Default value 9999.99 mL
Window = Time
Range
0 ... 999999 s
Default value 999999 s
Gran evaluation
Note
This evaluation method is possible only with Titrando and 855.
Gran evaluation
on | off (Default value: off)
If this option is enabled, then titration curves will be evaluated in accordance
with the Gran Plot procedure(see Chapter 5.6.3.9.4, page 856).
Procedure
Selection of the Gran procedure.
Selection Normalized | Standard
Default value Normalized
Initial volume
Volume which must be present in the measuring vessel before the command
is started.
Range 0.01 ... 9999.99 mL
Default value 50.0 mL