Metrohm tiamo 2.1 Manual - Manual (Page 1167)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1153
[Properties]
Opens the dialog window Call to edit the call selected in the table (see
Chapter 5.6.10.3.3, page 1153).
[Delete]
Deletes the selected call.
5.6.10.3.3 CALL - Call
Dialog window: Method ▶ CALL ▶ Properties... ▶ [New]
Call text
Text (can be edited to suit) for designating the call that is shown in the
command presentation.
Input 50 characters
Default value 'empty'
Track name
Selecting the track to be called. All the normal tracks defined in the method
can be selected (with the exception of the main track).
Selection 'Track name' | 'empty'
Default value 'empty'
Condition
on | off (Default value: off)
Expression for the condition(s) which can be created or edited with the for-
mula editor after pressing on or double-clicking in the text field (see
Chapter 2.4, page 23).
If this check box is activated, then the call will be carried out only if the
evaluation of the condition gives the result 1 (= true).
Input 1000 characters
Default value 'empty'
5.6.10.4 LOOP
5.6.10.4.1 LOOP - Overview
Dialog window: Method ▶ LOOP ▶ Properties.. ▶ LOOP - 'Command name'
Command for the repeated execution of a command sequence. The
loop can be terminated after fulfilling various stop criteria.
Appearance
The command has the following appearance: