Metrohm tiamo 2.1 Manual - Manual (Page 276)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
262 ￭￭￭￭￭￭￭￭ tiamo 2.1
– <swingHeadOneType> ... </
swingHeadOneType> Type of Swing Head on tower 1.
– <swingHeadOneSerial> ... </
swingHeadOneSerial> Serial number of Swing Head on tower 1.
– <towerNoTwo> ... </tower-
NoTwo> Tower number.
– <swingHeadTwoType> ... </
swingHeadTwoType> Type of Swing Head on tower 2.
– <swingHeadTwoSerial> ... </
swingHeadTwoSerial> Serial number of Swing Head on tower 2.
– <devicePorts dynamic=""> Data on the peripheral devices connected.
– <Port>
<subtype val="" /> Type of the device connected to the port:
XML_PORT_DEVICE_DOS = Dosing/Exchange unit
XML_PORT_DEVICE_REMOTE = Remote box
XML_PORT_DEVICE_STIR = Stirrer
– <dosPortName> ... </dosPort-
Name> Number of the MSB connector the dosing device was con-
nected to.
– <dosType> ... </dosType> Dosing device type.
– <dosSerial> ... </dosSerial> Dosing device serial number.
– <exchDosUnit> Data on exchange/dosing unit.
– <exdosTitle> ... </exdosTitle> Designation of the exchange/dosing unit.
– <exdosName> ... </exdos-
Name> Name of the exchange/dosing unit.
– <exdosType> ... </exdosType> Type of exchange/dosing unit.
– <exdosOrder> ... </exdosOr-
der> Order number of exchange/dosing unit.
– <exdosSerial> ... </exdosSerial> Serial number of exchange/dosing unit.
– <cylVol> ... </cylVol> Volume of buret cylinder.
– <cylSerial> ... </cylSerial> Serial number of buret cylinder.
– <Solution> Data on solution.
– <solTitle> ... </solTitle> ... Solution title.
– <solutionName> ... </solution-
Name> Solution name.