Metrohm tiamo 2.1 Manual User Manual
Page 279
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.1
￭￭￭￭￭￭￭￭
265
<sensorC val="" />
Blank value of the ISE sensor.
<resultUnit val="" />
Concentration unit of calibration.
<variance val="" />
Variance of calibration.
<sensorCalTemp val="" />
Calibration temperature.
<sensorCalTempType val="" />
Calibration mode.
<sensorCalDate val="" />
Calibration date.
<sensorCalMethod val="" />
Calibration method.
– <CalibrationTable>
Calibration solutions.
– <header>
Column headers.
<<RowDesc val="" />
Column header for buffers/standards.
<NominalVal val="" />
Column header for nominal value.
<MeasVal val="" />
Column header for measured value.
<CalTemp val="" />
Column header for calibration temperature.
<CalDur val="" />
Column header for measuring time.
<header>
– <body dynamic="">
– <data>
<RowDesc> ... </RowDesc>
Buffer/Standard.
<NominalVal> ... </NominalVal>
Nominal value.
<MeasVal> ... </MeasVal>
Measured value.
<CalTemp> ... </CalTemp>
Calibration temperature.
<CalDur> ... </CalDur>
Measuring time in s.
</data>
</body>
</CalibrationTable>
</CalibData>
– <StdAddData>
Standard addition data
<slope val="" />
Calculated slope of the standard addition curve.
<e0 val="" />
Calculated axis intercept of the standard addition curve.
<ion val="" />
Ion (Valency).
<conc val="" />
Calculated valency.
<concUnit val="" />
Concentration unit.