Metrohm tiamo 2.1 Manual - Manual (Page 1512)

9.9 Reports ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1498 ￭￭￭￭￭￭￭￭ tiamo 2.1
7 Close the dialog window with [OK].
8 In the program window Report template, click on the menu item
Tools ▶ Options....
The dialog window Options for report templates opens.
9 Define desired settings for the report template.
10 Close the window with [OK].
Editing existing modules
1
Select the symbol on the module bar and double-click on the
desired module in the report template.
The properties window of the selected module opens automatically.
2 Enter desired settings for the module.
3 Close the properties window with [OK].
4 Repeat steps 1 and 2 for each desired module.
Creating new modules
1 Select desired module symbol on the Module bar and place it on the
report template by creating a field with the left-hand mouse key.
The properties window for the corresponding module opens automat-
ically.
2 Define desired setttings for the module.
3 Close the properties window with [OK].
4 Repeat steps 1 and 2 for each desired new module.
5 Click on the symbol or the menu item File ▶ Save.
The report template is saved.