Metrohm tiamo 2.1 Manual - Manual (Page 827)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 813
Selection maximum
Default value maximum
Titrino
Range
0.01 ... 150.00 mL/min
Selection maximum
Default value maximum
Pause 2
Pause 2
Waiting time, e.g. for the electrode to settle down after the start or a reac-
tion time after the addition of the start volume. The pause follows at the
end of all the start conditions.
Range 0 ... 999999 s
Default value 0 s
5.6.3.8.6.4 STAT pH - Control parameters
Tab: Method ▶ STAT pH ▶ Properties... ▶ Control parameters
Command name
Name of the command.
Input 25 characters
Control point
Control point at pH
Definition of the pH value to be controlled.
Titrando, 855
Range
-20,000 ... 20,000
Selection off
Default value off
Titrino
Range
-20.00 ... 20.00
Selection off
Default value off
Titration rate
Titration rate
Three predefined rates, for which the parameters for Control are not dis-
played, can selected for the titration rate. The User setting must be selected
in order to be able to edit these parameters.