Metrohm tiamo 2.1 Manual - Manual (Page 1141)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1127
5.6.9.2 CTRL
5.6.9.2.1 CTRL - Overview
Dialog window: Method ▶ CTRL ▶ Properties... ▶ CTRL - 'Command name'
Command for Setting remote output lines.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 888, 890, 901,
902, 904, 905, 906, 907
Titrino: 702*, 716*, 718*, 719*, 720*, 721*, 736*, 751, 758, 784, 785,
794*, 795, 798, 799 (* devices with only 3 output lines)
Dosing Interface: 846
Coulometer: 756, 831
pH/Ion - Meter: 867
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Spectrometer: Avantes
Appearance
The command has the following appearance:
Parameters
The parameters for the command CTRL are configured in the following
dialog window:
￭ 5.6.9.2.2CTRL - Properties
Command variables
The following command variables are generated in the method run by the
command CTRL and can be used in formulas under the designation 'Com-
mand name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
never been started