Cabletron Systems CSX1000 User Manual
Page 193
Workgroup Remote Access Switch 193
C
ONFIGURING
N
ETWORK
L
OGIN
I
NFORMATION
Login Configuration Specific to TACACS Server
2.
Selection (1) from the TACACS Specific Device Login Menu allows you to change the password
control character:
3.
Selection (2) from the TACACS Specific Device Login Menu allows you to customize the
prompt order for device login. This prompt is particularly important, because the order of
prompts must be the same as the order expected by the TACACS server. Selection (2) displays
the following:
4.
Selection (3) from the TACACS Specific Device Login Menu allows you to adjust the return
code messages upon login attempt:
Note: There is no customization of Specific Device Login for the ACE Server.
U
SING
M
ANAGE
M
ODE
netlogin
Displays the current network login configuration data. After entering the
netlogin
command, you will be prompted for the type of login configuration information you want. The
prompt will resemble the CFGEDIT screen in which this information was originally
configured. You may display: user level security general configuration, login banners, login
configuration specific to RADIUS, and login configuration specific to TACACS.
Enter control character used to switch from LOGIN to CHANGE PASSWORD mode.
Select the control character that you wish to us by typing
caret (‘^’) followed by another character (example: ^A),
or ‘0’ to disable [Default = ^R]? <RET>
TACACS Device Login Prompt Order Menu:
Current Prompt Order is:
-----------------------------------------------------------------
First Prompt is LOGIN ID PROMPT (fixed)
Second Prompt is DYNAMIC PASSWORD PROMPT
Third Prompt is USER PASSWORD PROMPT
1) Prompt Order
Select function from above or <RET> for previous menu:
TACACS Return Code Messages Menu:
RESPONSE REASON MESSAGE
-----------------------------------------------------------------
1) ACCEPTED(1) NONE(0) ""
2) ACCEPTED(1) EXPIRING(1) "**** Password about to expire ****"
3) ACCEPTED(1) PASSWORD(2) "**** Password expiration imminent ****"
4) REJECTED(2) NONE(0) "**** Login invalid ****"
5) REJECTED(2) EXPIRING(1) "**** Please change PIN ****"
6) REJECTED(2) PASSWORD(2) "**** Device/Password invalid ****"
7) REJECTED(2) DENIED(3) ""
Select function from above or <RET> for previous menu: