Cabletron Systems CSX1000 - Manual (Page 406)

USER’S GUIDE
406 CyberSWITCH
If EtherTalk is selected, and no zones are displayed, then contact your Distributor or Customer
Support.
4. If you are using Open Transport, verify that Local Mac has chosen a proper AppleTalk address
within the valid network range (this would be 10-11 for the
example network ) by opening the
AppleTalk control panel as shown below:
If the Network Range is correct and the AppleTalk address is not within that range, then try to
close the AppleTalk control panel once, and then reopen it. If the AppleTalk address is still
invalid, then try to assign a valid address manually by marking User defined box. If you start
seeing zones, then you can take out the User defined tag.
If the Network Range is not correct, contact your Distributor or Customer Support.
5. If the AppleTalk address of Local Mac is valid, then check which AppleTalk router that Local
Mac is obtaining the information from by selecting info box in the AppleTalk control panel as
shown below (this can be done if Open Transport is being used):