Cabletron Systems CSX1000 - Manual (Page 88)

C
ONFIGURING
R
ESOURCES AND
L
INES
O VERVIEW
Resource refers to the computer resources that are part of the CyberSWITCH. A WAN resource is
the physical interface for the attachment of lines (i.e., connections) to your system.
Lines are communication facilities from the carriers. These lines directly attach to your system.
From the system perspective, lines provide the physical connection to switched networks. Lines are
not required for LAN connections.
There is an optional element, the system subaddress, that you may configure for a point-multipoint
line. This element is a call screening method. A subaddress is only needed if you have a line
interface type of point-multipoint, and you choose the subaddress call screening method.
R ESOURCES
Physical Resources may or may not be configurable, depending upon the country of operation.
The WAN resource, Ethernet resource and Serial resource (COMMPORT) are preinstalled and
preconfigured on all systems. However, switch type selection is country-dependent. Refer to the
country or switch type descriptions below.
C ONFIGURING R ESOURCES
U SING CFGEDIT
To configure the CyberSWITCH’s resources, select Physical Resources from the Main Menu. The
following will then be displayed:
1. Press 1 to begin the configuration of the resources. This selection will provide a display of
preconfigured resources, and the pertinent slot numbers and switch types for those resources.
2. Refer to the following country-dependent (or switch type) information to determine which
options are configurable.
Japan, 1TR6, TS013 and TS014 :
For these configurations, the Current Resource Configuration is not changeable. Upon selection of
this option, you will view a display of preconfigured resources only.
Physical Resources
1) Resources
2) Data Lines
3) Accesses
4) ISDN Subaddress
Select function from above or <RET> for previous menu: