Cabletron Systems CSX1000 - Manual (Page 448)

USER’S GUIDE
448 CyberSWITCH
Error reading platform type: couldn’t open file C:\SYSTEM\PLATFORM.NEI
Error reading platform type: error reading C:\SYSTEM\PLATFORM.NEI
Error reading platform type: there is no “plat name” field
Error reading platform type: there was no “=” in the string
Error reading platform type: type value is too large
Error reading platform type: type was not converted to an int
There is a problem with the platform.nei file. Reinstall the system Installation/Upgrade diskettes
or CD-ROM.
Error reading sdconf.rec file
An error occurred during parsing of the ACE configuration file. The file was found, but did not
have the expected format. Either repeat the download of the file from the ACE server, or reenter
the ACE database location configuration and save changes using CFGEDIT.
Error requesting slot activation
Contact your Distributor or Customer Support.
Error sending message to Call Control
The system detected a failure while sending a message to the WAN adapter. Restart the system and
review the resource configuration. If the error persists, contact your Distributor or Customer
Support.
Event <event code> occurred on FR Access <access index>, DLCI <dlci index>
A debug message logged to indicate Frame Relay events occurring for the indicated DLCI on the
indicated Access. The event is given in both textual, event, and numeric, code, forms.
Facility not subscribed - Slot=<slot # > Port=<port # >
This probably indicates a SPID configuration error on the indicated line. The configuration should
be corrected on the system or the switch.
Failed to allocate enough memory for XILINX load file
The WAN card initialization subsystem failed to allocate a buffer for use in downloading files.
Restart the system. If the problem continues, contact your Distributor or Customer Support.
FAILED TO BOOT SYSTEM SOFTWARE
While attempting to load the System software, an error was detected. The system will automatically
reset and attempt a reboot in an effort to correct the problem. If the system continues to fail, make
note of the displayed messages, and contact your Distributor or Customer Support. A software
update is likely needed.
FAILED TO FORMAT RFA
The Flash File System could not be formatted. The system will automatically reset and attempt a
reboot in an effort to correct the problem. If the system continues to fail, make note of the displayed
messages, and contact your Distributor or Customer Support. A software update is likely needed.
FAILED TO INSTALL XMODEM FILESET INTO FLASH MEMORY
While writing a file into the Flash File System, an error was detected. The system will automatically
reset and attempt a reboot in an effort to correct the problem. If the system continues to fail, make
note of the displayed messages, and contact your Distributor or Customer Support. A software
update is likely needed.