Call restrictions, Configuring call restrictions, Call restriction configuration elements – Cabletron Systems CSX1000 User Manual
Page 320: Call restrictions 320, Configuring call restriction parameters
USER’S GUIDE
320 CyberSWITCH
C
ALL
R
ESTRICTIONS
C
ONFIGURING
C
ALL
R
ESTRICTIONS
Note:
Certain restrictions apply to the use of
Call Restrictions and Semipermanent Connections
.
Refer to the Background Information discussion.
U
SING
CFGEDIT
1.
Select Call Restrictions from the Call Control Options menu.
2.
Follow the onscreen instructions for enabling this feature.
3.
The current call restriction configuration will be displayed.
4.
Enter the number Id associated with the parameter you want to change.
5.
Follow the onscreen instructions for changing the parameter.
U
SING
M
ANAGE
M
ODE
C
OMMANDS
callrest
Displays the current Call Restriction configuration data.
callrest off
Disables the Call Restriction feature.
callrest on
Enables the Call Restriction feature.
C
ALL
R
ESTRICTION
C
ONFIGURATION
E
LEMENTS
S
TATUS
Allows you to enable or disable the call restriction option.
H
OURS
C
ALLS
ARE
A
LLOWED
The allowable hours for outbound calls (inbound calls will always be allowed). Separate each hour
by a comma. Ranges are allowed by inserting a dash (-) between the first and last hours in the range.
A zero entered by itself will allow no calls during any hour.
Two actions are available if an outbound call is attempted at any other time:
1.
The call will not be allowed; a message will be displayed on the LCD, and written to the report
log.
2.
The call will be allowed; however, a warning will be written to the report log.