Cabletron Systems CSX1000 - Manual (Page 473)

Workgroup Remote Access Switch 473
S YSTEM M ESSAGES
System Message Summary
Semipermanent. Device "x" reconnected by admin.
The administrator has issued the
call device <device name> command after issuing the
disc device <device name> command. This restarts the semipermanent feature for the
indicated device.
Severe congestion CLLM received for DLCI <dlci index>
A CLLM message was received indicating severe congestion may be expected on the PVC
associated with the indicated DLCI.
Signal for unknown CallCmd task: <task Id>
Contact your Distributor or Customer Support.
<slot # , port # > Cfg Error
Line vs. adapter configuration error. A line is configured for port <port # > that does not exist on
the adapter in slot <slot # >.
[SNMP] Authentication failure, improper access rights
There are two possible causes for this message:
•
The SNMP Agent received a SetRequest PDU that contained a Community Name with an MIB
access level of MIB GUEST or MIB USER. The MIB access level must be MIB ADMIN to per-
form a SetRequest. The request was discarded.
• The SNMP Agent received a PDU that contained a Community Name with an MIB access level
of MIB GUEST and an object Id that cannot be accessed with an MIB GUEST access level. The
request was discarded.
[SNMP] Authentication failure, unknown community name
The SNMP Agent received a request PDU whose community name is not configured in the
Community Names Table. The request was discarded.
[SNMP] SNMP initialization failure - unable to allocate necessary memory
The SNMP feature was unable to initialize because it could not obtain the necessary memory. The
SNMP feature is disabled and no SNMP request will be processed. Contact your Distributor or
Customer Support.
[SNMP] SNMP initialization failure - unable to open UDP port
The SNMP feature was unable to initialize because it could not obtain the necessary UDP port. The
SNMP feature is disabled and no SNMP request will be processed. Check the configuration, and
then contact your Distributor or Customer Support.
[SNMP] SNMP initialized successfully
The SNMP Agent has been successfully initialized and is fully operational.
[SNMP] Unable to obtain an SNMP Trap queue entry buffer
The SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could not
obtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.
[SNMP] Unable to obtain an SNMP Trap queue header
The SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could not
obtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.