Cabletron Systems CSX1000 - Manual (Page 622)

USER’S GUIDE
622 CyberSWITCH
neif displays the interface table
pkt capture <connection mode> specifies which packets will be captured by the packet
capture feature (all, reqd, pend, actv, idle, or none)
pkt mac enables the MAC address monitor display
pkt [on/off] enables or disables the Packet Capture feature
pkt display displays captured packets
pkt load <filename> loads previously saved Packet Capture file into memory
pkt save <filename> saves captured packets to a disk file
pswd (GUEST) changes password for current access level
radius chap attempts a RADIUS authentication session using CHAP
radius iphost attempts a RADIUS authentication session using IP Host
resolution
radius ipres attempts a RADIUS authentication session using IP
resolution
radius macres attempts a RADIUS authentication session using MAC
resolution
radius pap attempts a RADIUS authentication session using PAP
recover notifies the boot device that you are attempting a
download of SSB software
restore copies backup config files into current files
restart restarts the system program remotely using Telnet
sentry ace attempts an authentication session using ACE
sentry radius attempts an authentication session using RADIUS
sentry status displays current status of user level authentication servers
sentry log logs rejection messages from the authentication server
session displays the current active administration sessions
session kill <session id> terminates the active session specified by the session id
snmp stats displays current SNMP related statistics
sp lists each semi-permanent device and associated status
status (GUEST) displays system errors and system messages
tcp conns displays the current TCP connection status
tcp stats displays the current system TCP statistics
Command
Use