Cabletron Systems CSX1000 - Manual (Page 560)

S
YSTEM
S
TATISTICS
O VERVIEW
Statistics can either be generated by issuing the ds command to display the set of statistics known
as the System Statistics, or by issuing a specific command to display statistics in a specific category.
In addition to using the ds command to display the system statistics, they are also automatically
written to a statistics log every 30 minutes. The statistics are stored in the following location:
Directory: \log
File Name: stat_log.nn
(“ nn ” is an integer that is incremented each time a new file is written.
The first set of statistics, System Statistics, are arranged by function. These are:
• connectivity statistics
• call restriction statistics
• call statistics
• throughput monitoring statistics
The rest of the statistics are arranged in alphabetical order. These statistics pertain to specific
features. The statistics you choose to display will depend on which system options you have
enabled. These statistics provide valuable information.
C ONNECTIVITY S TATISTICS
You can access Network Connectivity statistics by issuing the ds console command.
ISDN_Re-try
Retry count for re-establishing the data link after it fails.
ID_Re-try
Retry count for exchanging identification messages with a remote CyberSWITCH.
ID_Fail
Failure count for exchanging identification messages with a remote CyberSWITCH.
WAN_Reset
Reset count for the resetting of the WAN adapters.
C
ALL
R
ESTRICTION
S
TATISTICS
The system keeps a tally of the following Call Restriction statistics. These statistics can be compared
to the limits you have configured. These statistics can be displayed by issuing the
cr stats or
the ds command at the administration console.
call minutes (day)
The total call minutes that have been logged for the day.