Cabletron Systems CSX1000 - Manual (Page 442)

USER’S GUIDE
442 CyberSWITCH
[DHCP-P] Proxy Client disabled
This message indicates that the DHCP Proxy Client has been successfully disabled. This message
will appear after the DHCP Proxy Client has been disabled from Manage Mode.
[DHCP-P] Proxy Client enabled
This message will appear whenever the DHCP Proxy Client has been successfully enabled. This
could be during system initialization (if configuration values have enabled it), or after the DHCP
Proxy Client has been enabled from Manage Mode.
[DHCP-P] Proxy Client initialization failed
This message indicates that the DHCP Proxy Client did not initialize successfully. The DHCP Proxy
Client will not be operational. Contact your Distributor or Customer Support.
[DHCP-P] UDP port (67) closed
The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPS UDP
port (port 67). If the DHCP Relay Agent is enabled, the BOOTPS port must remain open. If this is
the case, the DHCP Proxy Client will not close the UDP port.
[DHCP-P] UDP port (67) opened
The DHCP Proxy Client is being enabled and it must open the BOOTPS UDP port (port 67). This
may occur during system initialization, or after the DHCP Proxy Client has been enabled from
Manage Mode. If the DHCP Relay Agent is also enabled, it may not be necessary for the Proxy
Client to open this UDP port.
[DHCP-P] UDP port (68) closed
The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPC UDP
port (port 68).
[DHCP-P] UDP port (68) opened
The DHCP Proxy Client is being enabled and it must open the BOOTPC UDP port (port 68). This
may occur during system initialization, or after the DHCP Proxy Client has been enabled from
Manage Mode.
[DHCP-R] Failed to allocate memory for transmit buffer pool
The system was unable to allocate memory for the DHCP Relay Agent’s transmit buffer pool
during initialization. The Relay Agent will not become operational. Contact your Distributor or
Customer Support.
[DHCP-R] Failed to close UDP port (67), erc = <x>
An error occurred while the device was trying to disable the DHCP Relay Agent from Manage
Mode. Contact your Distributor or Customer Support.
[DHCP-R] Failed to open UDP port (67), erc = <x>
An error occurred while attempting to enable the DHCP Relay Agent. The Relay Agent must open
the BOOTPS UDP port in order to operate successfully. If this port could not be opened, the Relay
Agent will not be enabled. Contact your Distributor or Customer Support.
[DHCP-R] Relay Agent disabled
The DHCP Relay Agent has been successfully disabled. This message will appear if the user
disabled the Relay Agent from Manage Mode.