Cabletron Systems CSX1000 - Manual (Page 441)

Workgroup Remote Access Switch 441
S YSTEM M ESSAGES
System Message Summary
Dedicated connection down: <slot # , port # >
The dedicated connection is down. Switched backup connections will be used, if available. This
message will occur if the other system is down, or if the network interface line is not connected, or
if the authentication of the remote device failed.
Dedicated connection to device <device name> up: <slot # >,<port # >
The indicated dedicated connection is operational.
[DHCP-P] Failed to close UDP port after terminating last DHCP client
An internal error occurred in the DHCP Proxy Client. When all DHCP client invocations are
terminated, the UDP ports used by the DHCP Proxy Client should be closed. Contact your
Distributor or Customer Support.
[DHCP-P] Failed to close UDP port (x), erc = <y>
This message appears when the DHCP Proxy Client is being disabled from Manage Mode and it
encounters an error while trying to close one or both of the UDP ports that it has open. Contact your
Distributor or Customer Support.
[DHCP-P] Failed to de-register with the IP Address Pool Manager, erc = <x>
This message indicates that a failure was encountered by the DHCP Proxy Client while it was being
disabled. It was unsuccessful in its attempt to de-register as a provider of “DHCP” addresses for
the IP Address Pool. Contact your Distributor or Customer Support.
[DHCP-P] Failed to open UDP port for first DHCP client
An internal error occurred in the DHCP Proxy Client. When the first DHCP client invocation starts,
the UDP ports used by the DHCP Proxy Client should open. Contact your Distributor or Customer
Support.
[DHCP-P] Failed to open UDP port (x), erc = <y>
This message appears when the DHCP Proxy Client is being enabled and it encounters an error
while trying to open one or both of the UDP ports that it requires for operation. Contact your
Distributor or Customer Support.
[DHCP-P] Failed to register with the IP Address Pool Manager, erc = <x>
This message indicates that a failure was encountered by the DHCP Proxy Client while it was being
enabled. It was unsuccessful in its attempt to register as a provider of “DHCP” addresses for the IP
Address Pool. Contact your Distributor or Customer Support.
[DHCP-P] Ignoring offers from DHCP server x.x.x.x; the server MUST be on a primary LAN interface, or
IP addresses will not be obtained
In order for the DHCP proxy client to successfully obtain IP addresses for multiple interfaces, the
DHCP server must reside on a primary LAN interface. If it does not, this message is written to the
Report Log, and no IP addresses will be obtained from the server and placed into the IP Address
Pool. To correct, use CFGEDIT to change the DHCP server’s interface from a secondary interface
into a primary interface for that LAN port.
[DHCP-P] Invalid DHCP Server LAN port encountered in configuration; NIF entry not activated
This message appears when the DHCP Proxy Client encounters an invalid configuration setting for
an IP network interface’s LAN port on which the DHCP server is to be reached. This will result in
no IP addresses being obtained for the network interface in question. Contact your Distributor or
Customer Support.