Ipx type 20 packet handling, Configuring ipx type 20 packet handling, Ipx type 20 packet handling 288 – Cabletron Systems CSX1000 User Manual

Page 288: Configuring ipx type 20 packet handling 288, Ipx t, 20 p

Advertising
background image

USER’S GUIDE

288 CyberSWITCH

without generating a keep-alive response. The duration timer T starts when a device is
disconnected and is reset each time a new connection is established.

Some of these <SYS> packets are overloaded in that they are not just keep-alive packets but are
control packets needed for the application to run successfully and hence have to be routed like
regular SPX data packets. If any NetWare application does not seem to work across WANs, it may
be because of the mishandling of these <SYS> packets and can be traced by disabling SPX keep-
alive spoofing.

This above described implementation is followed for keep-alive packets received over the LAN and
the WAN. If a keep-alive is received over the WAN and it is determined that a spoofed keep-alive
should be generated, it will be returned over the same WAN connection on which it was received.

The parameters for SPX spoofing are configured for each device. The SPX spoofing option can be
enabled or disabled. By default the option is enabled. When disabled the SPX keep alives are routed
without any special handling. If the option is enabled the SPX spoofing duration time T is specified
in minutes. The default is set to 120 minutes.

IPX T

YPE

20 P

ACKET

H

ANDLING

C

ONFIGURING

IPX T

YPE

20 P

ACKET

H

ANDLING

U

SING

CFGEDIT

1.

Press 8 from the IPX menu to configure IPX type 20 packet handling. The following screen will
be displayed:

2.

Press 1 to enable IPX type 20 packet WAN forwarding. Follow the onscreen instructions to
complete the enable process. Return to the IPX type 20 handling menu.

3.

Press 2 to add IPX type 20 packet WAN forwarding devices.
a.

Press 1 to add a device.

b.

Enter the device’s name.

c.

From the displayed list, select an IPX type 20 packet forward control method.

U

SING

M

ANAGE

M

ODE

C

OMMANDS

ipxt20

Allows you to configure IPX type 20 information.

IPX Type 20 Packet Handling Menu:

1) IPX Type 20 Packets WAN Forwarding (Enable/Disable)
2) IPX Type 20 Forwarding Devices.

Select function from above or <RET> for previous menu:

Advertising
This manual is related to the following products: