Cabletron Systems CSX1000 - Manual (Page 623)

Workgroup Remote Access Switch 623
A DMINISTRATIVE C ONSOLE C OMMANDS T ABLE
telnet puts you in the Telnet command mode
see
telnet mode commands for available commands
telnet <ip-address>[port # ] begins a Telnet session for the indicated Telnet host
telnet mode commands:
close
exit
open [target host][port # ]
send [send parameter]
set <name><value>
status
toggle
closes the current Telnet connection to a target host
closes the current Telnet session
establishes a Telnet session with a target host
sends special Telnet control functions to the currently
connected target host
sets operating parameters for the current Telnet session
provides information about the current Telnet session
sets operating parameters for the current Telnet session
term displays the terminal type.
term set <terminal type> sets the terminal type
tftp get invokes the TFTP GET command
tftp put invokes the TFTP PUT command
tftp session displays TFTP session statistics
tftp session kill <session id> terminates the active TFTP session specified by the session
id
tftp stats (GUEST) displays the current TFTP statistics
time [hours:minutes:seconds] displays or changes current system time
trace [on/off] enabled or disables call trace information reports
trace ipxwan [on/off] enables or disables the IPXWAN tracing option
trace lapb[on/off] enables or disables the packet tracing option for LAPB
data link information
trace ppp [on/off] enables or disables the tracing of ppp packets
trace x25 [on/off] enables or disables the packet tracing option for X.25
connection information
udp conns displays UDP connection status
udp stats displays UDP statistics
update notifies the boot device you are attempting an upgrade
prepares SSB for download of software via XMODEM
ver (GUEST) displays current software version and hardware resource
revision information
wan fr-ietf stats [device/
fr_accessname_dlci] [prot] displays WAN frame relay connection information for
devices configured for the FR_IETF line protocol
Command
Use