Cabletron Systems CSX1000 - Manual (Page 155)

C
ONFIGURING
D
EVICE
L
EVEL
D
ATABASES
O VERVIEW
Device level security is an authentication process between internetworking devices, in which
authentication takes place automatically. Both bridges and routers support this form of
security.Device level security is available to the network locally through the On-node Device
Database or remotely through the VRA Manager or RADIUS Server.
This chapter provides information for enabling and configuring the on-node device database, and
enabling an off-node database location. If an off-node database location is specified, refer to the
chapter
Configuring Off-node Server Information for configuration instructions.
O N - NODE D EVICE D ATABASE
C ONFIGURING AN O N - NODE D EVICE D ATABASE
Before configuring an on-node device database, you must first configure network interfaces. For
further information regarding network interfaces and their corresponding configuration elements,
refer to:
•
IP Network Interfaces for IP Routing
• IPX Network Interfaces for IPX
• AppleTalk Port Information for AppleTalk
U SING CFGEDIT
1. To begin the configuration of an on-node database or any of the Security Database options, start
at the main menu and progress through the screens as shown below:
Main Menu:
1) Physical Resources
2) Options
3) Security
4) Save Changes
Select function from above or <RET> to exit: 3
Security Menu:
1) Security Level
2) System Options and Information
3) Device Level Databases
4) User Level Databases (Enable/Disable)
5) Off-node Server Information
6) Network Login Information
Select function from above or <RET> for previous menu: 3