Cabletron Systems CSX1000 - Manual (Page 192)

USER’S GUIDE
192 CyberSWITCH
U SING M ANAGE M ODE
netlogin
Displays the current network login configuration data. After entering the netlogin
command, you will be prompted for the type of login configuration information you want. The
prompt will resemble the CFGEDIT screen in which this information was originally
configured. You may display: user level security general configuration, login banners, login
configuration specific to RADIUS, and login configuration specific to TACACS.
netlogin change
Allows you to change the current network login configuration data. After entering the
netlogin change command, you will be prompted for the type of login configuration
information you want to change. The prompt will resemble the CFGEDIT screen in which this
information was originally configured. You may change: user level security general
configuration, login banners, login configuration specific to RADIUS, and login configuration
specific to TACACS.
L OGIN C ONFIGURATION S PECIFIC TO RADIUS S ERVER B ACKGROUND I NFORMATION
Login configuration parameters specific to RADIUS include the specification of prompt order and
a password control character.
The prompt order specified on the system must match the prompt order specified on the RADIUS
server. The default order is:
•
First prompt: LOGIN ID PROMPT (fixed)
• Second prompt: DYNAMIC PASSWORD PROMPT
• Third prompt: USER PASSWORD PROMPT
If you need to change this order, you may specify this order of prompts in the login process.
The password control character is a key sequence you specify to switch between the login mode
and the change password mode. In order to enable this feature for the general user, you need to
configure this password control character.
L OGIN C ONFIGURATION S PECIFIC TO TACACS S ERVER
C ONFIGURING TACACS S ERVER L OGIN I NFORMATION
U SING CFGEDIT
1. Select option (4), Login Configuration Specific to TACACS Server from the Network Login
Information menu. If you need guidance to find this menu, refer to the instructions provided
in the
Network Login General Configuration configuration section. The following screen will be
displayed:
TACACS Specific Device Login Menu:
1) Password Control Character is ^R.
2) Prompt Order for Device Login.
3) Messages for TACACS Return Codes.
4) Return to the Previous Menu.
Select function from above or <RET> for previous menu: 1