Vra manager as a call control manager, Configuring vra manager for call control, Configuration elements – Cabletron Systems CSX1000 User Manual
Page 330: Vra manager as a call control manager 330, Vra m
USER’S GUIDE
330 CyberSWITCH
VRA M
ANAGER
AS
A
C
ALL
C
ONTROL
M
ANAGER
This feature allows you to use the Virtual Remote Access (VRA) Manager for call control
management only. This feature allows you to continue to use other authentication servers (e.g.,
RADIUS, ACE) yet still gain the benefits of VRA call control management.
C
ONFIGURING
VRA M
ANAGER
FOR
C
ALL
C
ONTROL
U
SING
CFGEDIT
1.
Select VRA as Call Control Manager from the Call Control Options menu.
2.
The current status of the VRA Call Control Server will be displayed. Select 1 to toggle between
enabled and disabled, and ensure an enabled setting.
3.
Select TCP port number if you wish to change this setting. Changes here will also appear on the
VRA Authentication menu.
4.
Return to the Main Menu.
5.
For authentication, if you are using the On-node Device Table or Off-node Device Level Security,
you are finished with the configuration of this feature. If you are using User Level Security, you
may wish to adjust the Authentication Time-out and/or change the Call Control Failure
banner. Continue with the following steps.
6.
Select Security and then Network Login Information.
7.
Select Network Login General Configuration.
8.
Select Authentication Timeout. Follow on-screen instructions to adjust this value.
9.
Return to the Network Login Information Menu and select Network Login Banners.
10. Select the Call Control Failure Banner. Follow on-screen instructions to adjust this banner.
Note:
If you are using the VRA Manager as your authentication manager, you do not have to
configure the call control option separately. This is only necessary when you are
configuring another device for authentication, and wish to use VRA for call control only.
C
ONFIGURATION
E
LEMENTS
S
TATUS
Allows you to enable or disable VRA for call control management.
TCP
PORT
NUMBER
The TCP port number used by the VRA Manager. Note that you can assign a user-defined port
number, but that the VRA Manager TCP port number must be entered identically on both the
CyberSWITCH and the VRA Manager.