Cabletron Systems CSX1000 - Manual (Page 334)

USER’S GUIDE
334 CyberSWITCH
PPP C ONFIGURATION E LEMENTS
M AX T ERMINATE
The number of Terminate-Request packets sent without receiving a Terminate-Ack before
assuming that the peer is unable to respond.
M AX C ONFIGURE
The number of Configure-Request packets sent without receiving a valid Configure-Ack,
Configure-Nak or Configure-Reject before assuming that the peer is unable to respond.
M AX F AILURE
The number of Configure-Nak packets sent without sending a Configure-Ack before assuming that
configuration is not converging. Any additional Configure-Nak packets are converted to
Configure-Reject packets.
R ESTART T IMER
Times transmissions of Configure-Request and Terminate-Request packets. Expiration of the
Restart timer causes a Timeout event, and retransmission of the corresponding Configure-Request
or Terminate-Request packet.
LCP P ROTOCOL F IELD C OMPRESSION (PFC)
Provides a way to negotiate the compression of the Data Link Layer Protocol field.
LCP A DDRESS C ONTROL F IELD C OMPRESSION (ACFC)
Provides a way to negotiate the compression of the data link layer address and control fields.
R ECEIVE S ETTINGS
The receive settings for PFC and ACFC control whether (and how) the system receives PPP Packets
with PFC or ACFC. Receive setting options include:
•
mandatory: requested, repeated indefinitely if NAK'd
• preferable: requested, repeated up to MaxAttempts times if NAK'd
• supported: not requested, a peer request will be ACK'd
• not supported: not requested, NAK'd if the peer requests it
S END S ETTINGS
The send settings for PFC and ACFC control whether (and how) the system sends PPP packets with
PFC or ACFC. Send setting options include:
•
mandatory: requested, repeated indefinitely if NAK'd
• preferable: requested, repeated up to MaxAttempts times if NAK'd
• supported: not requested, a peer request will be ACK'd
• not supported: not requested, NAK'd if the peer requests it
IPCP A DDRESS N EGOTIATION I NITIATION
IPCP address negotiation initiation defines when IPCP will initiate “IP address” IPCP option
negotiation. The possible choices are:
•
always initiate: IPCP will always initiate the IP address option negotiation (on a PPP link).
• If IP Address Unknown: IPCP will initiate the negotiation only when the peer’s IP address is
unknown (for example, the system is running in the no-security mode, or the device entry does
not have an IP address configured.
Note: The default value is “Always Initiate.”